Altazip Macintosh OS 8-9 - Dial up Connection

Your Internet connection can be setup easily using the Internet Setup Assistant that should be installed with the Mac OS.

If you are unable to find the Internet Setup Assistant, or if you do not wish to use the Assistant, you can setup your connection on your Macintosh manually:

Setup Remote Access

Click the Apple menu, go to Control Panels, and open Remote Access. Note: Remote Access is also known as PPP in earlier versions of Mac OS.

Enter your username and password into the Name and Password fields. If you do not want to enter your password each time you connect, choose the option to Save password.

Enter 896-2839 into the Number field.
Dashes (-) and spaces are not required.

Click the Options button and click the Redial tab. Set the Redial option to Off.

Click the Connection tab. Make sure that Use verbose logging is not checked.

The settings under Reminders are optional, but we recommend checking only Flash icon in menu bar while connected.

Click the Protocol tab. Set the Use Protocol to PPP.

The following options should be checked:

• Connect automatically when starting TCP/IP applications
• Allow error correction and compression in modem
• Use TCP header compression

Click OK.

Setup TCP/IP

After you have configured Remote Access, you will need to configure TCP/IP.

With Remote Access (or PPP) still open, click the Remote Access (or PPP) menu. Choose TCP/IP. In Connect via: select PPP.
In Configure: select Using PPP Server.
Enter 166.70.91.2 in the DNS field

• Enter altazip.com into the Search domains field.

Close TCP/IP and save the changes. Close Remote Access and save the changes.